GATE Control Station for Android


GATE Control Station v1.6.3

Release date: 24-09-2020

Added:
- Support for non-GBU ETUs connected via Blu-Link dongle

- Location activation check before Bluetooth scan
Improved:

- Message and Warnings bar
- View of profiled settings
- Interface colors
- Minor fixes


GATE Control Station v1.6.2

Release date: 10-09-2020
Added:
- Tooltips
Improved:

- Magazine window
- Series Safety Limit settings
- Magazine simulation settings
- Low ammo warning settings
- Minor fixes


GATE Control Station v1.5.6
Release date: 08-05-2020
Added:
- Support for Quantum Trigger™
Improved:
- Trigger calibration process
- Minor fixes


GATE Control Station v1.5.5
Release date: 24-03-2020
Added:
- Regional lock implications in firmware edition comparison window
Improved:
- ASTER update process
- Handling of Regional lock (changes for Series safety limit and Active brake)
- Handling of Magazine capacity for TITAN V2 NGRS
- Minor fixes


GATE Control Station v1.5.4
Release date: 18-02-2020
Added:
- New design of purchase process layout (especially new form of edition comparison)
- Possibility to enable preview mode of EXPERT firmware
Improved:
- Device update process


GATE Control Station v1.5.3
Release date: 24-01-2020
Added:
- Possibility to install the same firmware again in the device
Improved:
- Handling of 'Current' statistic in GBU firmware
- Refreshing of information about trigger sensor state
- Various bug fixes
Changed:
- 'Fire mode' name was changed to 'Fire selector mode'
- 'Allow profile change' parameter name was changed to 'Allow profile change via selector'


GATE Control Station v1.5.2
Release date: 12-12-2019
Improved:
- Various improvements enhancing operation of the app in cooperation with EXPERT firmware
- Numerous bug fixes


GATE Control Station v1.4.3
Release date: 30-09-2019
Added:
- Beta support for EXPERT firmware
- LAST BBs statistic for ASTER
- Support for 3dsecure 2.0 payments
Improved:
- Various bug fixes


GATE Control Station v1.4.0
Release date: 01-08-2019
Added:
- Full support for ASTER
Improved:
- Various bug fixes


GATE Control Station v1.3.1
Release date: 20-05-2019
Improved:
- Firmware edition detection
- Device update process
- Various bug fixes


GATE Control Station v1.3.0
Release date: 12-11-2018
Added:
- Full support for TITAN V2 NGRS
- Warning about dangerous trigger setting (too high sensitivity)
Improved:
- Way of highlighting states of sensors
- GUI fixes
- Various bug fixes


GATE Control Station v1.2.0
Release date: 01-08-2018
Added:
- Possibility to upgrade firmware edition directly in the app
- Secure PayPal payments
- Automatic firmware download and installation
- Possibility to turn off switching of pre-cocking mode via fire selector
- Mail
Improved:
- Dashboard
- Bug fixes
- 64 minor improvements
Changed:
- Name 'Pre-cocking Smart' was changed to 'Pre-cocking Trigger'. The functionality has not changed.


GATE Control Station v1.1.5
Added:
- Support for Android 8.1


GATE Control Station v1.1.4
Improved:
- Trigger sensitivity and fine calibration adjustment


GATE Control Station v1.1.3
Improved:
- Various bug fixes


GATE Control Station v1.1.2
Improved:
- Various bug fixes


GATE Control Station v1.1.1
Improved:
- Registration & login
- Various bug fixes


GATE Control Station v1.1.0
Added:
- GCS account support: login, registration form
- Support for TITAN V3
Improved:
- Various bug fixes


GATE Control Station v1.0.0
- Initial release

 

GATE Control Station for Windows


GATE Control Station v3.0.0 beta 7
Release date: 20-08.2020

Improved:
- Selector calibration in TITAN V2 NGRS


GATE Control Station v3.0.0 beta 6
Release date: 28-07.2020

Added:
- Preferences window
- Sending diagnostics reports option
- Sending feedback option
Improved:
- Choose device window
- My account window
- Minor fixes


GATE Control Station v3.0.0 beta 5
Release date: 08-05-2020
Added:
- Support for Quantum Trigger™
- Support for Inbox
- Login with Google
- Possibility to disable profiles in EXPERT firmware edition
- Messages about confirming clearing of DTC and Statistics
Improved:
- Trigger calibration
- Setting of Low ammo warning
- Profiling is now simplified
- Detecting of USB-Link disconnection
- Setting of Pre-cocking mode in BASIC firmware edition
- Option Bolt catch in Magazine mode
- Trigger preferences window for TITAN V2
- Updated icons of functions
- Minor fixes


GATE Control Station v3.0.0 beta 4
Release date: 14-02-2020
Added:
- GATE Control Station installer
Improved:
- Pre-cocking options for Gear ratio DSG
- Setting of Regional lock in the device
Changed:
- 'Fire mode' name was changed to 'Fire selector mode'


GATE Control Station v3.0.0 beta 3
Release date: 17-01-2020
Improved:
- Restoring default settings window in BASIC and ADVANCED firmware edition
- Firmware update procedure
- Selector calibration process in all TITAN versions and ASTER
- Various bug fixes


GATE Control Station v3.0.0 beta 2
Release date: 31-12-2019
Added:
- Full support for all TITAN versions with GBU update


GATE Control Station v3.0.0 beta 1
Release date: 18-09-2019
- First public beta release – full support for ASTER


GATE Control Station v2.6.3
Release date: 09-09-2020

Added:
-Firmware compatibility Information


GATE Control Station v2.6.2
Release date: 20-05-2019
Improved:
- Firmware edition detection
- Communication with server
- Device update process
- Various bug fixes


GATE Control Station v2.6.1
Release date: 18-01-2019
Improved:
- NGRS fire selector states
- Tactical Programming Card update bug after USB-Link disconnection
- Minor bug fixes


GATE Control Station v2.6
Release date: 12-11-2018
Added:
- Full support for TITAN V2 NGRS
- Warning about dangerous trigger setting (too high sensitivity)
Improved:
- Way of highlighting states of sensors
- Various bug fixes


GATE Control Station v2.5
Release date: 01-08-2018
Added:
- Automatic firmware download and installation
- Possibility to turn off switching of pre-cocking mode via fire selector
- Mail
Improved:
- Dashboard
- Bug fixes
- Numerous minor improvements
Changed:
- Name 'Pre-cocking Smart' was changed to 'Pre-cocking Trigger'. The functionality has not changed.


GATE Control Station v2.4
Release date: 21-11-2017
Added:
- Support for TITAN V3 
Changed:
- Sensors page has 2 tabs for different TITAN versions: V2 and V3


GATE Control Station v2.3
Release date: 05-10-2017
Added:
- Active brake settings which allow for adjusting motor braking power manually (available only for firmware 2.1 or later)
Changed:
- Now regional lock is displayed only if active


GATE Control Station v2.2
Release date: 14-09-2017
Added:
- Support for firmware editions 
Improved:
- Changing gear ratio automatically resets cycle adaptation data. There is no need to restore factory settings after changing gear ratio.


GATE Control Station v2.1
Release date: 07-07-2017
Added:
- Possibility to install beta version of firmware
- Regional lock for SEMI ONLY (can be activated only by distributors)
- Gear Ratio: 19-tooth (available with next firmware version)
- Statistics' description
- Rankings
- Privacy Policy
- Profile menu


GATE Control Station v2.0
Release date: 31-03-2017
Improved:
- Whole new GUI


GATE Control Station v1.1
Release date: 21-02-2017
Added:
- Colors of DTC errors:
Blue - information codes - do not require any action
Yellow - problems that can be solved by user
Red - problems that require contact with GATE Support Team
- Selector calibration procedure (Advanced → Selector calibration)
- Equalizer function settings
- Sounds when switching selector or trigger position


GATE Control Station v1.0
Release date: 14-12-2016
Added: 
- Documentation (Help → Manuals)
- User data for sending reports to GATE. To send a report, user must enter his email address and country.
Improved: 
- Setting the trigger sensitivity after resetting factory settings or default settings 


GATE Control Station v0.9
Release date: 24-11-2016
- First public beta release

 

GATE Control Station for macOS


GATE Control Station v3.0.0 beta 7
Release date: 20-08.2020

Improved:
- Selector calibration in TITAN V2 NGRS


GATE Control Station v3.0.0 beta 6
Release date: 28-07.2020

Added:
- Preferences window
- Sending diagnostics reports option
- Sending feedback option
Improved:
- Choose device window
- My account window
- Minor fixes


GATE Control Station v3.0.0 beta 5
Release date: 08-05-2020
Added:
- Support for Quantum Trigger™
- Support for Inbox
- Login with Google
- Possibility to disable profiles in EXPERT firmware edition
- Messages about confirming clearing of DTC and Statistics
Improved:
- Trigger calibration
- Setting of Low ammo warning
- Profiling is now simplified
- Detecting of USB-Link disconnection
- Setting of Pre-cocking mode in BASIC firmware edition
- Option Bolt catch in Magazine mode
- Trigger preferences window for TITAN V2
- Updated icons of functions
- Minor fixes


GATE Control Station v3.0.0 beta 4
Release date: 14-02-2020
Added:
- GATE Control Station installer
Improved:
- Pre-cocking options for Gear ratio DSG
- Setting of Regional lock in the device
- Connecting of USB-Link
Changed:
- 'Fire mode' name was changed to 'Fire selector mode'


GATE Control Station v3.0.0 beta 3
Release date: 17-01-2020
Improved:
- Restoring default settings window in BASIC and ADVANCED firmware edition
- Firmware update procedure
- Selector calibration process in all TITAN versions and ASTER
- Various bug fixes


GATE Control Station v3.0.0 beta 2
Release date: 31-12-2019
Added:
- Full support for all TITAN versions with GBU update


GATE Control Station v3.0.0 beta 1
Release date: 18-09-2019
- First public beta release – full support for ASTER


GATE Control Station v2.6.3
Release date: 09-09-2020

Added:
-Firmware compatibility Information

Improved:
- USB-Link detection for macOS 10.15

 


GATE Control Station v2.6.2
Release date: 20-05-2019
Improved:
- Firmware edition detection
- Communication with server
- Device update process
- Erroneous reading of configuration fixed
- Various bug fixes


GATE Control Station v2.6.1
Release date: 18-01-2019
Improved:
- NGRS fire selector states
- Tactical Programming Card update bug after USB-Link disconnection
- Minor bug fixes


GATE Control Station v2.6
Release date: 12-11-2018
Added:
- Full support for TITAN V2 NGRS
- Warning about dangerous trigger setting (too high sensitivity)
Improved:
- Way of highlighting states of sensors
- Various bug fixes


GATE Control Station v2.5
Release date: 01-08-2018
Added:
- Automatic firmware download and installation
- Possibility to turn off switching of pre-cocking mode via fire selector
- Mail
Improved:
- Dashboard
- Bug fixes
- Numerous minor improvements
Changed:
- Name 'Pre-cocking Smart' was changed to 'Pre-cocking Trigger'. The functionality has not changed.


GATE Control Station v2.4
Release date: 21-11-2017
Added:
- Support for TITAN V3 
Changed:
- Sensors page has 2 tabs for different TITAN versions: V2 and V3


GATE Control Station v2.3
Release date: 05-10-2017
Added:
- Active brake settings which allow for adjusting motor braking power manually (available only for firmware 2.1 or later)
Changed:
- Now regional lock is displayed only if active


GATE Control Station v2.2
Release date: 14-09-2017
Added:
- Support for firmware editions
Improved:
- Changing gear ratio automatically resets cycle adaptation data. There is no need to restore factory settings after changing gear ratio.


GATE Control Station v2.1
Release date: 07-07-2017
Added:
- Possibility to install beta version of firmware
- Regional lock for SEMI ONLY (can be activated only by distributors)
- Gear Ratio: 19-tooth (available with next firmware version)
- Statistics' description
- Rankings
- Privacy Policy
- Profile menu


GATE Control Station v2.0
Release date: 31-03-2017
Improved:
- Whole new GUI


GATE Control Station v1.1
Release date: 21-02-2017
Added:
- Colors of DTC errors:
Blue - information codes - do not require any action
Yellow - problems that can be solved by user
Red - problems that require contact with GATE Support Team
- Selector calibration procedure (Advanced → Selector calibration)
- Equalizer function settings
- Sounds when switching selector or trigger position


GATE Control Station v1.0
Release date: 21-12-2016
- First public beta release

 

TITAN firmware


If you cannot see your device on the list or it is accompanied by an exclamation mark, you must install the device’s driver manually. You can download the driver here: http://www.ftdichip.com/Drivers/VCP.htm


TITAN V2 firmware


TITAN V2 – ver. 3.0-05
Release date: 07-08-2020
- Release of stable GBU
Improved:
- Burst/auto fire mode for 2-stage trigger setting
- Magazine simulation functionality for 2-stage trigger mode


TITAN V2 – ver. 3.0-04
Release date: 29-04-2020
Improved:
- Algorithm of supply voltage sensor


TITAN V2 – ver. 3.0-03
Release date: 16-03-2020
Improved:
- Clearing of all statistics in case of factory settings reset
- Operation of ‘ROF achieved on Semi’ statistic
- DSG algorithm
- Other bug fixes
Changed:
- In programming via trigger mode, vibration indicating an option/function occurs only after releasing the trigger


TITAN V2 – ver. 3.0-01
Release date: 08-11-2019
- Release of beta GBU and EXPERT firmware: details


TITAN V2 – ver. 2.2b05
Release date: 01-08-2018
Added:
- Possibility to turn off switching of pre-cocking mode via fire selector


TITAN V2 – ver. 2.1
Release date: 08-11-2017
Added:
- Possibility to adjust motor braking power


TITAN V2 – ver. 2.0
Release date: 27-07-2017
Added:
- Statistics
- Rankings
- Compatiblility with 19-tooth sector gear
- Regional lock
Improved:
- Pre-cocking setup via fire selector. Now you don't need to fire a shot to switch pre-cocking mode. You can do it in two ways:
a) Switch fire selector to SAFE and pull the trigger
b) Switch fire selector to SEMI, fire a shot and keep the trigger pulled
While the trigger is being pulled, you are able to select pre-cocking mode:
SAFE = Pre-cocking OFF
SEMI = Pre-cocking SMART
AUTO = Pre-cocking AUTO
- Motor emergency shutdown with fire selector. It is possible only when switching from AUTO to SAFE. Switching fire selector between SEMI <–> AUTO or SEMI <–> SAFE during a shot does not induce any break of cycle or vibration.
- Low battery warnings. User is warned 5 times before the battery is discharged. Each warning is communicated by 3 vibrations: HIGH → MID → HIGH.
Changed:
- Mode of notifying user about discharged battery (UVP1). Now these are 3 vibrations: HIGH → MID → LOW.


TITAN V2 – ver. 1.9
Release date: 21-02-2017
Added:

- Trigger equalizer configuration (OFF, EQ1, EQ2).
OFF – to fire a next shot, you need to release the trigger until it reaches the selected trigger sensitivity level 
EQ1 – to fire a next shot, just release the trigger so as it changes the state of two trigger sensors
EQ2 – to fire a next shot, just release the trigger so as it changes the state of one trigger sensor
EQ1 or EQ2 are especially useful when trigger sensitivity level is very high. Then you don't need to fully release the trigger while quickly firing on SEMI.
- Fire selector sensors calibration (via GCS). Your selector will work even more precisely
- Option to turn off the motor by switching fire selector when cycle detection is OFF.

Improved:
- UVP2 protection – a new power supply algorithm. You can shoot more BBs with the same battery. Now TITAN works much more efficiently with weak, low capacity batteries (also NiMH and NiCd).
- Trigger detection algorithm
- Pre-cocking SMART
- ROF stabilization
- Self-test for voltage higher than 16.5 V


TITAN V2 – ver. 1.8
Release date: 06-12-2016
Improved:
- Trigger detection. Added compatibility with speed triggers and triggers with hole. Fixed problem with double shooting during trigger release.
- Diagnostic Trouble Codes detection

 

TITAN V3 firmware


TITAN V3 – ver. 3.0-04
Release date: 07-08-2020

- Release of stable GBU

Improved:

- Burst/auto fire mode for 2-stage trigger setting

- Magazine simulation functionality for 2-stage trigger mode

- Algorithm for active brake


TITAN V3 – ver. 3.0-03
Release date: 16-03-2020
Improved:
- Clearing of all statistics in case of factory settings reset
- Operation of ‘ROF achieved on Semi’ statistic
- DSG algorithm
- Handling of Burst/Auto mode for 2nd stage in 2-stage trigger
- Other bug fixes
Changed:
- In programming via trigger mode, vibration indicating an option/function occurs only after releasing the trigger


TITAN V3 – ver. 3.0-01
Release date: 08-11-2019
- Release of beta GBU and EXPERT firmware: details

TITAN V3 – ver. 0.5b02
Release date: 04-10-2018
Improved:
- Algorithm of the gear sensor 


TITAN V3 – ver. 0.5b01
Release date: 01-08-2018
Added:
- Possibility to turn off switching of pre-cocking mode via fire selector


TITAN V3 – ver. 0.4
Release date: 01-08-2018
- Stable release


TITAN V3 – ver. 0.3
Release date: 21-11-2017
- Stable release

 

 

TITAN V2 NGRS firmware


TITAN V2 NGRS – ver. 3.0-04
Release date: 07-08-2020
- Release of stable GBU
Improved:
- Burst/auto fire mode for 2-stage trigger setting
- Magazine simulation functionality for 2-stage trigger mode


TITAN V2 NGRS – ver. 3.0-03
Release date: 16-03-2020
Improved:
- Clearing of all statistics in case of factory settings reset
- Operation of ‘ROF achieved on Semi’ statistic
- Handling of Burst/Auto mode for 2nd stage in 2-stage trigger
Changed:
- In programming via trigger mode, vibration indicating an option/function occurs only after releasing the trigger


TITAN V2 NGRS – ver. 3.0-01
Release date: 08-11-2019
- Release of beta GBU and EXPERT firmware: details

TITAN V2 NGRS – ver. 0.3-01
Release date: 04-11-2019
Improved:
- Handling of UVP2 fuse


TITAN V2 NGRS – ver. 0.2
Release date: 12-10-2018
- Stable release

 

ASTER firmware

ASTER V2 firmware


ASTER V2 – ver. 3.2-02

Release date: 08-09-2020

Improved:
- 2-stage trigger operation for Quantum Trigger
- Fire selector operation at high ambient temperatures

Fixed:
- Elimination of a shot while switching from SAFE to SEMI when Quantum Trigger is pressed.


ASTER V2 - ver. 3.2-01

Release date: 21-07-2020

Fixed:

- First shot failure after switching fire selector from SAFE


ASTER V2 - ver. 3.1

Release date: 01-07-2020

Fixed:

- First shot failure after switching fire selector from SAFE

Added:

-Green LED blinks after connecting the battery if self test was passed successfully


ASTER V2 – ver. 3.1-03
Release date: 08-05-2020
Improved:
- Trigger operation
- Removing of blockade after trigger sensor was overexposed


ASTER V2 – ver. 3.1-02
Release date: 02-04-2020
Added:
- Support for BLDC motors
- Support for GATE Quantum Trigger™


ASTER V2 – ver. 3.1-01
Release date: 29-01-2020
Improved:
- Operation of the trigger
- Detecting of 2-cell battery


ASTER V2 – ver. 3.0-03
Release date: 03-12-2019
Added:
- Burst/Auto mode for 2nd stage in 2-stage trigger [ADVANCED] [EXPERT]
- Resetting of 'ROF achieved on Semi' statistic when restoring factory settings [EXPERT]
Improved:
- Marking of trigger sensitivity levels when device is connected to GCS


ASTER V2 – ver. 3.0-02
Release date: 20-11-2019
Improved:
- Calibration of device without using GCS app
- Various improvements enhancing operation of the device


ASTER V2 – ver. 3.0-01
Release date: 08-11-2019
- Release of beta GBU and EXPERT firmware: details


ASTER V2 – ver. 0.6-26
Release date: 05-11-2019
Improved:
- Various improvements enhancing operation of the device


ASTER V2 – ver. 0.6-23
Release date: 24-10-2019
Added:
- 'ROF achieved on Semi' statistic
Improved:
- Burst/Auto mode in 2-stage trigger
- Detection of strong electromagnetic interferences


ASTER V2 – ver. 0.6-18
Release date: 30-09-2019
Added:
- LAST BBs statistic
Improved:
- Auto mode in 2-stage trigger
- Malfunctioning of device when switching fire selector from Safe to Binary while keeping the trigger pulled


ASTER V2 – ver. 0.6-17
Release date: 25-09-2016
Added:
- DTC for detection of electromagnetic interferences
Improved:
- Detection of strong electromagnetic interferences
- Using of fire modes assigned to SAFE position
- Operation of Binary fire mode


ASTER V2 – ver. 0.6-15
Release date: 17-09-2019
Added:
- Protection against strong electromagnetic interferences
Changed:
- Default setting of Battery protection to LiPo with warning 3.2 V

 

 

 

   

Newsletter

Sign up to our newsletter and get the latest news about products, premieres and promotions.

captcharefresh

Powered by ChronoForms - ChronoEngine.com