![]() |
![]() |
![]() |
TITAN V2 NGRS™ is an AEG Control System for Tokyo Marui V2 Next Generation Recoil Shock gearboxes.
Transform your Tokyo Marui Next Generation AEG into an advanced training weapon system. Adjust your weapon and check the Statistics using USB-Link and GATE Control Station App for PC, MAC and Android devices. TITAN V2 NGRS has the whole new trigger sensor, which allows to set hair trigger with ludicrous precision: even 50 sensitivity levels for first millimeter of trigger movement. The innovative 3rd generation trigger sensor offers you even 460 possible sensitivity settings. Gain a unique tactical advantage thanks to the extremely fast trigger response and lots of other useful functions. Boost your AEG with computerized technology. Give your AEG a new lease of life!
TITAN is not just another drop-in mosfet. It is the complex system that turns your AEG into an advanced training weapon. |
|
Why TITAN V2 NGRS is so special?
|
What is a drop-in module? It is an electronic unit, which replaces the trigger contacts and the cut-off lever, which takes control of your AEG. |
![]() |
||
SettingsTITAN gives you the option to adjust:
Please note that the BASIC firmware edition does not support all the functions |
![]() |
SensorsWith the GCS you can easly calibrate and adjust sensors.
|
![]() |
SensorsWith the GCS you can easly calibrate and adjust sensors.
The selector sensor gives you an option for fine calibration of selector switching point. You can also turn off / on bolt catch function. |
![]() |
StatisticsTITAN gives you the option to check:
Please note that the BASIC firmware edition does not support the Statistics |
![]() |
|
StatisticsTITAN gives you the option to check:
Please note that the BASIC firmware edition does not support the Statistics |
![]() |
Blu-LinkBlu-Link allows for wireless management of your GATE ETU via GCS App for iOS, Android and later this year, also Windows / macOS. You can use iPhone, Android smartphone or a computer to control ASTER or TITAN. Blu-Link perfectly expands GATE ETUs possibilities by equipping them with Bluetooth® 5.0 technology. |
|||||||||||||||||||||||||||||||||||
![]() |
USB-LinkThe USB-Link allows for connecting GATE devices with PC, MAC, Android smartphones and tablets.
|
|||||||||||||||||||||||||||||||||||
Programming via triggerThis programming mode allows you to configure basic functions of TITAN only with trigger and fire selector. During programming, functions and options are indicated by vibrations and sounds. The following TITAN options can be programmed via trigger:
|
||||||||||||||||||||||||||||||||||||
![]() |
Compatibility
Please note: to connect ETU to GCS you need USB-Link or Blu-Link |
Control options
Blu-Link with GCS App | USB-Link with GCS App | Programming via Trigger | Tactical Programming Card | |
Compatibility with ETU with GBU update | + | + | + | - |
Basic settings adjustment | + | + | + | + |
Advanced settings adjustment | + | + | - | - |
Firmware update | + | + | - | - |
Portable | + | + | + | + |
Sensors check | + | + | - | + |
Diagnostic Trouble Codes | + | + | + | + |
Statistics | + | + | - | - |
Updates and support | + | + | + | - |
Get ready for the amazing functions such as:
![]() |
TRIGGER SENSOR (gen.3) Thanks to the precise 3rd generation trigger sensor you can set trigger sensitivity with ludicrous precision: at least 50 sensitivity levels for first millimeter of trigger movement. Depending on trigger construction, it enables even 420 possible sensitivity settings. You do not have to disassemble your AEG. Just use the GATE Control Station™ App and adjust the trigger to your preferences and level of skills. |
![]() |
BOLT CATCH Bolt catch sensor supports empty magazine detection, what gives full compatibility with Tokyo Marui V2 Next Generation Recoil Shock. |
![]() |
CONFIGURABLE FIRE SELECTOR (gen.2) Two selector sensors allow you to use up to six fire selector modes, including innovative SEMI-BURST-AUTO mode:
|
![]() |
CYCLE DETECTION (gen.2) Thanks to the dual gear sensor, TITAN precisely detects in which position the cycle should finish - even in case of Infinite Torque-up gears or TM NGRS gears. Therefore, even the shortest trigger action produces at least one full cycle.
Thanks to the cycle detection function you get:
|
![]() |
PRE-COCKING (gen.2*) Victory in the game is often a matter of fractions of seconds. Thanks to PRE-COCKING, you gain a trigger reaction similar to a real gun. It allows for initial spring compression, which speeds up the trigger response significantly.
And three PRE-COCKING BOOST options: HIGH / MID / LOW *Now the pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to set the pre-cocking boost manually Please note: using PRE-COCKING increases wear and tear on the gearbox. |
![]() |
BURST (gen.2*) The burst enables you to shoot a pre-determined number of BBs, which is very useful in MILSLIM and when using low-caps. * There is no need to set burst time. You can easily set burst between two and 10 shots. |
![]() |
ROF CONTROL This enables a reduction in a gun's rate of fire. You use stronger LiPo batteries, and still have a ROF just like in a real gun. |
![]() |
ROF STAB It allows you to change the way the ROF Control works: |
![]() |
SNIPER DELAY It lets you to set delay between each SEMI shots to simulate the delay from reload or recoil. You can set 0.5s, 1s, 2s or 3s delay. |
![]() |
SMART TRIGGER We know how vital the fast trigger response is during combat. This is why we have developed the Smart Trigger function. It enables you to achieve a faster trigger response. It works with the ROF Control System. During the first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full ROF, and subsequent shots at a reduced ROF. The best results can be achieved by using a battery with a higher than standard voltage. For example, if you use a 7.4V battery, you can replace it with 11.1V. In this way, you will achieve a faster trigger response with the same rate of fire as with a standard battery. |
![]() |
AUG MODE Enjoy two stage trigger. Activate AUG Mode and set two different trigger sensitivities. Pulling the trigger slightly produces SEMI or BURST fire and pulling the trigger further produces BURST or AUTO fire (depending on the fire selector mode). |
![]() |
BATTERY PROTECTION (gen.2*) Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, it will not allow firing. *TITAN detects the number of cells automatically. There is no need to reprogram TITAN every time you replace the battery. |
![]() |
LOW BATTERY WARNING When the battery voltage drops to a predefined level, the motor will vibrate at regular intervals. |
![]() |
SMART FUSE We have developed an electronic fuse with an accurate current sensor. A combination of current, voltage and temperature measurements makes your AEG installation highly reliable. It protects the MOSFET against overheating, overloading and short-circuiting. If your airsoft gun becomes jammed, the function protects the motor and battery against damage. |
![]() |
ADAPTIVE ACTIVE BRAKE It automatically adjusts the motor's braking power according to your needs. This prolongs the lifespan of the motor. There is also an option to set the motor braking power manually. |
![]() |
MOSFET Do you want to achieve a higher ROF and faster trigger response? Are you planning a power upgrade of your gun? In that case, you need a MOSFET. It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher ROF of the gun and a faster trigger response. |
![]() |
BUILT-IN SELF-TEST This allows you to quickly check whether the drop-in module is working properly. It helps to locate where the problem lies when anything goes wrong. |
![]() |
COATING Thanks to its special conformal coating, our product is resistant to atmospheric conditions (Military Specification MIL-V-173C). |
![]() |
14.8V LI-PO READY The drop-in module can be used with batteries up to and including 14.8V LI-PO. The minimum operating voltage is 3V and maximum is 17V. |
![]() |
PRINTED QUICKSTART Make your adventure start more easily with a new product. The quickstart contains basic information and hints. |
TITAN has advanced optical sensors:
- 3rd generation trigger sensor
- dual gear sensor
- bolt catch sensor
- selector sensors
Thanks to the optical sensors we have eliminated the problem of faulty switches that can occur in competitors' drop-in mosfets. The trigger has no mechanical connections with the PCB. This eliminates mechanical stresses and provides for high reliability.
Thanks to the gear sensor you get:
- Automatic BURST – there is no need to set burst time. You can set burst between two and 10 shots;
- Automatic PRE-COCKING – pre-cocking is fully operational in SEMI, BURST and AUTO mode and there is no need to set pre-cocking boost manually. You can easily set the pre-cocking as high, mid or low;
- FULL CYCLE - when the pre-cocking is off, TITAN ensures that the gearbox always makes full cycles.
You can trust TITAN because:
- Every time you pull the trigger, gearbox completes the correct cycle. The gears stop exactly where they should. The gearbox works efficiently.
- It is protected against short-circuits, overheating and overloading
- It protects the battery against over-discharge
- It significantly improves battery life, rate of fire, spring life and gearbox reliability (when pre-cocking is off)
- It is compatible with the strongest AEG replicas and batteries (ready to use with LiPo 14.8V, 5000 mAh, 60C)
FIRMWARE EDITIONSThe TITAN is currently available in two firmware editions: BASIC and ADVANCED. In the future, the EXPERT edition will be also available. The table on the left shows differences between the BASIC and ADVANCED firmware editions.
In order to upgrade your TITAN firmware from BASIC to ADVANCED, you need to purchase the upgrade: TITAN Firmware Edition Upgrade |
![]() |
FIRMWARE EDITIONSThe TITAN is currently available in two firmware editions: BASIC and ADVANCED. In the future, the EXPERT edition will be also available. The table above shows differences between the BASIC and ADVANCED firmware editions.
In order to upgrade your TITAN firmware from BASIC to ADVANCED, you need to purchase the upgrade: TITAN Firmware Edition Upgrade |
TITAN V2 NGRS is available in two sets:
|
Sets comparision: | Advanced Set | Basic Module |
TITAN with ADVANCED firmware edition | + | - |
TITAN with BASIC firmware edition | - | + |
USB-Link | + | - |
USB-A Cable for USB-Link | + | - |
USB-C Cable for USB-Link | + | - |
Micro-USB Cable for USB-Link | + | - |
TITAN Patch | + | - |
How to choose TITAN box version?
Case 1:
- Do you have USB-Link? NO.
- Would you like to have advanced firmware or basic firmware edition? ADVANCED.
- You should buy TITAN Advanced Set. MSRP Price: 850 PLN
Case 2:
- Do you have USB-Link? YES.
- Would you like to have advanced firmware or basic firmware edition? ADVANCED.
- You should buy TITAN Basic Module and Advanced Firmware Upgrade. MSRP Price: 550 + 150 PLN = 700 PLN
Case 3:
- Do you have USB-Link? NO.
- Would you like to have advanced firmware or basic firmware edition? BASIC.
- You should buy TITAN Basic Module and USB-Link separately. MSRP Price: 550 + 150 PLN = 700 PLN
Case 4:
- Do you have USB-Link? YES.
- Would you like to have advanced firmware or basic firmware edition? BASIC.
- You should buy TITAN Basic Module. MSRP Price: 550 PLN
TITAN V2 NGRS Advanced Set 2
The advanced set version: at once you purchase all you need to take total advantage from TITAN. Advanced Set contains TITAN with ADVANCED firmware edition.
![]() ![]() |
Kit contents:
- TITAN V2 NGRS Module with ADVANCED firmware (rear or front wired)
- USB-Link for GATE Control Station™ App
- USB Cables:
a) USB-C to Micro-USB (0.6m / 1ft 11in)
b) Micro-USB to Micro-USB (0.6m / 1ft 11in) - Installation Kit
- TITAN Patch
- Quickstart Guides
TITAN V2 NGRS Expert Blu-Set
Kit contents:
1. TITAN V2 NGRS with EXPERT firmware edition (rear or front wired)
2. Blu-Link
3. Installation Kit
4. Connectors Set
5. Quickstart Guides (for TITAN and Blu-Link)
6.TITAN Patch
7. PIN card
8. Troubleshooting card
TITAN V2 NGRS Advanced Set
The advanced set version: at once you purchase all you need to take total advantage from TITAN. Advanced Set contains TITAN with ADVANCED firmware edition.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Kit contents:
- TITAN V2 NGRS Module with ADVANCED firmware (rear or front wired)
- USB-Link for GATE Control Station™ App
- USB Cables:
a) USB-A to Micro-USB (1.5m / 4ft 11in)
b) USB-C to Micro-USB (0.6m / 1ft 11in)
c) Micro-USB to Micro-USB (0.6m / 1ft 11in) - Installation Kit
- TITAN Patch
- Quickstart Guides
TITAN V2 NGRS Basic Module
The best if you already own the USB-Link. The Basic Module set contains TITAN with BASIC firmware edition. If you will decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
- TITAN V2 NGRS Module with BASIC firmware (rear or front wired)
- Installation Kit
- Quickstart Guide
Blu-Link [BLU-L]
Blu-Link allows for wireless management of your GATE ETU via GCS App for iOS, Android and later this year, also Windows / macOS. You can use iPhone, Android smartphone or a computer to control ASTER or TITAN and connect them with other compatible GATE devices, such as STATUS Gun-mounted Computer. Blu-Link perfectly expands GATE ETUs possibilities by equipping them with Bluetooth® 5.0 technology.
Kit contents:
- Blu-Link
- Connectors set
- ‘Troubleshooting’ Card
- PIN Card
- Quickstart Guide
USB-Link for GATE Control Station™ App [USB-L2]
Allows connecting TITAN to PC/Mac as well as smartphone with Android in order to use the GATE Control Station App.
- USB-Link for GCS App
- USB-C cable [0.6 m / 1 ft 11 in]
- Micro-USB cable [0.6 m / 1 ft 11 in]
- 'Troubleshooting' Card
- Quickstart Guide
USB-Link for GATE Control Station™ App [USB-L]
Allows connecting TITAN to PC/Mac as well as smartphone with Android in order to use the GATE Control Station App.
- USB-Link for GCS App
- USB-A to Micro-USB cable [1.5 m / 4 ft 11 in]
- Quickstart Guide
Please note:
- To run and set up the TITAN, it is necessary to have the USB-Link
- TITAN V2 NGRS is not compatible with Tactical Programming Card
- TITAN V2 NGRS does not support DSG and 19-tooth gears
TITAN V2 NGRS supports:
- Tokyo Marui M4 Next Generation
- Tokyo Marui SCAR-H Next Generation
- Tokyo Marui SCAR-L Next Generation
- Tokyo Marui HK416D Next Generation
- Tokyo Marui HK416C Next Generation
- Tokyo Marui HK417 Next Generation
TITAN V2 NGRS does not support:
- Tokyo Marui 36C Custom Next Generation
- Tokyo Marui Model 36K Next Generation
- Tokyo Marui AKS74N Next Generation
- Tokyo Marui AKS74U Next Generation
- Tokyo Marui AK102 Next Generation
- Tokyo Marui AK47 Type 3 Next Generation
Warning!
GATE does not guarantee the compatibility of mosfets and ETUs such as TITAN or ASTER with brushless motors. Connection of a brushless motor can cause immediate damage to the device, motor and battery, that is not covered by the warranty and can lead to a fire.