ttn 4 black RGB ttn 4 black RGB

TITAN V2 NGRS is an AEG Control System for Tokyo Marui V2 Next Generation Recoil Shock gearboxes

About TITAN V2 NGRS

Transform your Tokyo Marui Next Generation AEG into an advanced training weapon system. Adjust your weapon and check the stats using a Blu-Link or USB-Link and the GATE Control Station App. TITAN V2 NGRS has a whole new trigger sensor, which allows you to set hair trigger with ludicrous precision: even 50 sensitivity levels for the first millimeter of trigger movement. The innovative 3rd generation trigger sensor offers you even 460 possible sensitivity settings. Gain a unique tactical advantage thanks to the extremely fast trigger response and lots of other useful functions. Boost your AEG with computerized technology. Give your AEG a new lease of life!

TITAN is not just another drop-in mosfet. It is the complex system that turns your AEG into an advanced training weapon.

TITANGearbox type: Tokyo Marui V2 Next Generation Recoil Shock

Why is TITAN V2 NGRS so special?

  • 3rd generation trigger sensor which allows you to set the hair trigger with ludicrous precision: at least 50 sensitivity levels for first millimeter of trigger movement and even 420 sensitivity levels for the whole movement
  • a dual gear sensor and bolt catch sensor, which means full compatibility with Tokyo Marui V2 Next Generation Recoil Shock
  • innovative optical sensors instead of mechanical switches prone to faults
  • user-friendly configuration via the GATE Control Station App for iOSAndroid, macOS, and Windows
  • online firmware updates
  • access to the Statistics
  • replicates trigger response like in a real gun
  • compatible with most powerful AEG replicas
 

What is a drop-in module? It is an electronic unit, which replaces trigger contacts and the cut-off lever, which takes control of your AEG.

 

02P1011092 200623 1015 1920

You can trust TITAN because:

  • every time you pull the trigger, the gearbox completes the correct cycle; the gears stop exactly where they should. The gearbox works efficiently.
  • it's protected against short-circuits, overheating and overloading
  • it protects the battery against over-discharge
  • it significantly improves battery life, ROF, spring life, and gearbox reliability (when Pre-Cocking is off)
  • it is compatible with the strongest AEG replicas and batteries (ready to use with LiPo 14.8V, 5000 mAh, 60C)

  

TITAN

GATE Control Station App

Connect your TITAN with the GCS App via Blu-Link or USB-Link and get total control of your AEG:

  • control your airsoft gun from your iOS, Android, macOS or Windows device
  • set trigger sensitivity exactly as you like and adjust other TITAN settings in a simple way 
  • use automatic Pre-Cocking to gain a trigger reaction just like in a real gun
  • try out ROF control, magazine simulation, and dozens of other functions
  • update and upgrade Firmware
  • check BB counters and telemetric data
  • perform diagnostics and send reports

GATE Control Station for your device

GATE Control Station Android download page

  

 

sensors na strone 1470x980 210609 0850 TTN V2 NGRS

 

Advanced Optical Sensors:

  • 3rd generation trigger sensor
  • dual gear sensor
  • bolt catch sensor
  • selector sensors

Thanks to the optical sensors we have eliminated the problem of faulty switches that can occur in competitors' drop-in mosfets. The trigger has no mechanical connections with the PCB. This eliminates mechanical stresses and provides for high reliability.

GATE CTO

Thanks to the gear sensor you get:

  • Automatic BURST – there is no need to set burst time. You can set burst between 2 and 99 shots
  • Automatic Pre-Cocking – Pre-Cocking is fully operational in SEMI, BURST, and AUTO mode and there is no need to set pre-cocking boost manually. You can easily set the Pre-Cocking as high, mid or low
  • FULL CYCLE – when Pre-Cocking is off, TITAN ensures that the gearbox always makes full cycles

 

Trigger Sensitivity Adjustment

To adjust trigger sensitivity you don't have to disassemble your replica. Just use the GCS App and adjust the trigger to your preferences and skill level. You can even activate the 2-Stage Trigger and set two different trigger sensitivities. Pulling the trigger slightly produces SEMI or BURST fire and pulling the trigger further produces BURST, BURST/AUTO or AUTO fire. Additionally, by upgrading the firmware to the ADVANCED or EXPERT edition, you can even use Equalizer Mode. Thanks to this option, you don't need to fully release the trigger to fire the next shot. This option is really useful when trigger sensitivity level is very high.

Please note:

  • Trigger sensitivity and selector switching point cannot be set while in Programming via Trigger mode.
  • USB-Link and Blu-Link are not included in the BASIC TITAN sets
  • To upgrade your ETU, please go to the upgrade page and choose between ADVANCED (€ 34.90) and EXPERT (€ 49.90) firmware.

 

TITAN

GATE Ecosystem

We believe there's plenty of room for innovation in the airsoft industry. That's why we're developing a series of accessories delivering tactical advantage never seen before, connected with the TITAN and ASTER MOSFETs.

One of the first accessories of the GATE Ecosystem is STATUS, a tactical gun-mounted computer providing real-time data from your AEG replica. No more surprises with an empty magazine or a discharged battery, take aim with precision thanks to the hop-up assistant. And this is just the beginning of the GATE Ecosystem products to come.

 

 

 

Features

Get ready for these amazing features:

TRIGGER SENSOR (Generation 3)

Thanks to the precise 3rd generation trigger sensor you can set trigger sensitivity with ludicrous precision: at least 50 sensitivity levels for the first millimeter of trigger movement. Depending on trigger construction, it enables even 420 possible sensitivity settings. You do not have to disassemble your AEG. Just use the GATE Control Station App and adjust the trigger to your preferences and level of skills.

BOLT CATCH

The Bolt catch sensor supports empty magazine detection, what gives full compatibility with Tokyo Marui V2 Next Generation Recoil Shock.

CONFIGURABLE FIRE SELECTOR (gen.2)

Two selector sensors allow you to use up to six fire selector modes, including innovative SEMI-BURST-AUTO mode:

  • SAFE-SEMI-AUTO
  • SAFE-SEMI-SEMI
  • SAFE-SEMI-BURST
  • SAFE-BURST-AUTO
  • SAFE-SEMI-BURST/AUTO (short press - BURST, long press - AUTO)
  • SEMI-BURST-AUTO (SAFE mode via the fast switch SAFE-SEMI-SAFE)

CYCLE DETECTION (gen.2)

Thanks to the dual gear sensor, TITAN precisely detects in which position the cycle should finish - even in case of Infinite Torque-up gears or TM NGRS gears. Therefore, even the shortest trigger action produces at least one full cycle.

 

 

Thanks to the cycle detection function you get:

  • Automatic BURST – there is no need to set the burst time. You can set the burst between two and 10 shots;
  • Automatic PRE-COCKING – pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to set the pre-cocking boost manually. You can simply set the pre-cocking as high, mid or low;
  • FULL CYCLE - when the pre-cocking is off, TITAN ensures that the gearbox completes a full cycle. You gain a higher reliability.

PRE-COCKING (gen.2*)

Victory in the game is often a matter of fractions of seconds. Thanks to PRE-COCKING, you gain a trigger reaction similar to a real gun. It allows for initial spring compression, which speeds up the trigger response significantly.

  1. AUTO MODE – the spring is automatically compressed after each shot,
  2. MANUAL MODE – set pre-cocking values yourself.

And three PRE-COCKING BOOST options: HIGH / MID / LOW


*Now the pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to set the pre-cocking boost manually

Please note: using PRE-COCKING increases wear and tear on the gearbox.

BURST (gen.2*)

The burst enables you to shoot a pre-determined number of BBs, which is very useful in MILSLIM and when using low-caps.


* There is no need to set burst time. You can easily set burst between two and 10 shots.

ROF CONTROL

This enables a reduction in a gun's rate of fire. You use stronger LiPo batteries, and still have a ROF just like in a real gun.

ROF STAB

It allows you to change the way the ROF Control works:
ON - ROF Control uses PWM to decrease ROF. Thanks to this, gearbox works smoothly what decreases wear and tear of AEG internal parts.
OFF - ROF Control adds breaks between shots to decrease ROF. It gives you more realistic experience.

SNIPER DELAY

It lets you to set delay between each SEMI shots to simulate the delay from reload or recoil. You can set 0.5s, 1s, 2s or 3s delay.

SMART TRIGGER

We know how vital the fast trigger response is during combat. This is why we have developed the Smart Trigger function. It enables you to achieve a faster trigger response. It works with the ROF Control System. During the first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full ROF, and subsequent shots at a reduced ROF. The best results can be achieved by using a battery with a higher than standard voltage. For example, if you use a 7.4V battery, you can replace it with 11.1V. In this way, you will achieve a faster trigger response with the same rate of fire as with a standard battery.

Works only when ROF STAB is ON.

AUG MODE

Enjoy two stage trigger. Activate AUG Mode and set two different trigger sensitivities. Pulling the trigger slightly produces SEMI or BURST fire and pulling the trigger further produces BURST or AUTO fire (depending on the fire selector mode).

BATTERY PROTECTION (gen.2*)

Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, it will not allow firing.


*TITAN detects the number of cells automatically. There is no need to reprogram TITAN every time you replace the battery.

LOW BATTERY WARNING

When the battery voltage drops to a predefined level, the motor will vibrate at regular intervals.  

SMART FUSE

We have developed an electronic fuse with an accurate current sensor. A combination of current, voltage and temperature measurements makes your AEG installation highly reliable. It protects the MOSFET against overheating, overloading and short-circuiting. If your airsoft gun becomes jammed, the function protects the motor and battery against damage.

ADAPTIVE ACTIVE BRAKE

It automatically adjusts the motor's braking power according to your needs. This prolongs the lifespan of the motor. There is also an option to set the motor braking power manually.

MOSFET

Do you want to achieve a higher ROF and faster trigger response? Are you planning a power upgrade of your gun? In that case, you need a MOSFET.

It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher ROF of the gun and a faster trigger response.

BUILT-IN SELF-TEST

This allows you to quickly check whether the drop-in module is working properly. It helps to locate where the problem lies when anything goes wrong.

COATING

Thanks to its special conformal coating, our product is resistant to atmospheric conditions (Military Specification MIL-V-173C).

14.8V LI-PO READY

The drop-in module can be used with batteries up to and including 14.8V LI-PO. The minimum operating voltage is 3V and maximum is 17V.

PRINTED QUICKSTART

Make your adventure start more easily with a new product. The quickstart contains basic information and hints.

 

Compatibility

 

 

  GCS for PC/macOS  GCS for Android GCS for iOS
TITAN + + +
ASTER + + +
TPC + + -
USB-Link + + -
Blu-Link - + +

Please note: to connect your ETU to GCS you need a USB-Link or Blu-Link

Control Options

  Blu-Link with GCS App USB-Link with GCS App Programming via Trigger Tactical Programming Card
Compatibility with GBU updated ETUs  + + + -
Basic Setting Adjustment + + + +
Advanced Settings Adjustment + + - -
Firmware Update + + - -
Portable + + + +
Sensors Check + + - +
Diagnostic Trouble Codes + + + +
Telemetry + + - -
Updates and Support + + + -

Information
TITAN is not compatible with the WARFET Tactical Programming Card.

Caution
GATE does not guarantee the compatibility of MOSFETs and ETUs such as TITAN or ASTER with brushless motors. Connection of a brushless motor can cause immediate damage to the device, motor, and battery, which is not covered by the warranty and can lead to fire.

 

Programming

Programming

Thanks to our built-in technology, you choose how to configure TITAN. Do you need a quick change in the settings on the battlefield? You can do this via the trigger. Need more functions? Choose the Tactical Programming Card. But if you prefer full control with a visual interface, connect your replica via the USB-Link or Blu-Link dongles to our GCS App.

This programming mode allows you to configure the basic functions of TITAN with the use of just the trigger and selector of your replica. During programming, the functions and options are indicated by vibrations and sounds.

The following TITAN options can be programmed via trigger:

ttn programming card

TTN card

 Programming Accessories

Blu-Link

Blu-Link allows for wireless management of your GATE ETU via GCS App for iOS and Android devices. Blu-Link perfectly expands GATE ETUs possibilities by equipping them with Bluetooth® 5.0 technology.

   

USB-Link

The USB-Link allows to connect and manage GATE ETUs with GCS App for Windows, macOS, and Android devices.

Please note: to connect your ETU to GCS you need a USB-Link or Blu-Link

Videos

 

Sets

TITAN Expert Blu-Set

Get the best deal for experienced airsofters – TITAN with EXPERT Firmware and Blu-Link allowing you to connect TITAN to Android and iOS devices via Bluetooth®.

1blu-l-expert-top_1491.jpg blu-l-expert-bottom_1491_V4.jpg

Contents:

  1. TITAN with EXPERT Firmware Edition (rear or front wired)
  2. Blu-Link for the GATE Control Station App
  3. INSTALLATION KIT
  4. TITAN Patch
  5. QuickStart Guide

 

TITAN Advanced Set

Get TITAN with ADVANCED Firmware, USB-Link, and USB cables allowing you to connect TITAN to your PC, Mac as well as Android devices. 

TITAN

Contents:

  1. TITAN V2 with ADVANCED Firmware Edition (rear or front wired)
  2. USB-Link for the GATE Control Station App
  3. USB-C cable for USB-Link [0.6 m / 1 ft 11 in]
  4. Micro-USB cable for USB-Link [0.6 m / 1 ft 11 in]
  5. INSTALLATION KIT
  6. QuickStart Guide

TITAN Basic Module

The best if you want to use TITAN in two or more airsoft guns. Then you don't need the second USB-Link from the Advanced Set. It includes TITAN with BASIC Firmware Edition.

01ttn-top-1920.jpg 02ttn-bottom-1920.jpg 03ttn-open-1920.jpg

04ttn2-stuff-1920.jpg 05ttn2-kit-stuff_1217.jpg 06ttn2-kit-bags_1217.jpg

07ttn2-kit-connectors_1217.jpg 08ttn2-kit-selector-plate-sticker_1217.jpg

Contents:

  1. TITAN with BASIC Firmware Edition (rear or front wired)
  2. INSTALLATION KIT
  3. QuickStart Guide

Accessories

STATUS

A tactical gun-mounted computer providing you real-time data from your AEG replica. Reinforce your tactical decisions and gain the confidence you need to win. No more surprises with an empty magazine or a discharged battery, take aim with precision thanks to the hop-up assistant. Enter the GATE Ecosystem and use your tactical advantage thanks to complete data and dozens of functions at your fingertips.

TITAN

Blu-Link

Blu-Link allows for wireless management of your GATE ETU via GCS App for iOS, Android and later this year, also Windows / macOS. You can use iPhone, Android smartphone or a computer to control ASTER or TITAN and connect them with other compatible GATE devices, such as STATUS, the gun-mounted Computer. Blu-Link perfectly expands GATE ETUs possibilities by equipping them with Bluetooth® 5.0 technology.

01blu-l-box-top.jpg 02blu-l-box-bottom.jpg 03blu-l-box-open.jpg

04blu-l-box-stuff_1491.jpg 05blu-l-top.jpg 06blu-l-bottom.jpg

Contents:

  1. Blu-Link
  2. Connectors set
  3. Troubleshooting Card
  4. PIN Card
  5. Quickstart Guide

 

USB-Link for GATE Control Station App

Allows connecting TITAN to PC/Mac as well as smartphone with Android in order to use the GATE Control Station App.

TITAN TITAN TITAN TITAN

      1. USB-Link for GCS App
      2. USB-C cable [0.6 m / 1 ft 11 in]
      3. Micro-USB cable [0.6 m / 1 ft 11 in]
      4. Troubleshooting Card
      5. QuickStart Guide

 

TITAN Tactical Programming Card

Provides you with very easy access to the Drop-in Module functions' settings anywhere you are.

TITAN TITAN

        1. TITAN Tactical Programming Card
        2. QuickStart Guide

Notice: TITAN is not compatible with the WARFET Tactical Programming Card.

 

Firmware Editions

Take the next step and gain additional functionALITIESs with ADVANCED and EXPERT upgrades. Enjoy access to main ETU statistics and measurements, precise ROF control, all fire modes such as customizable BURSTY, SEMI RAMPING, BURST/AUTO in one mode, equalizer, sniper delay and many other extremely useful functions – everything to prepare for the most demanding mission.

 

TITAN is available in 3 firmware editions: BASIC, ADVANCED, and EXPERT.

  • BASIC: the best for those who prefer simplicity but require the highest quality. Economic version with limited number of functions. If you decide to have more functions, there is always an option to upgrade firmware from BASIC to ADVANCED or EXPERT.
  • ADVANCED: the best for those who like complex solutions. Advanced version with wide variety of functions. It enables access to the Statistics and ASTER World Rankings.
  • EXPERT: the best for experienced airsofters. Vast diversity of settings and options combined with maximum configuration capabilities allow you to prepare for the most demanding mission

The table below contains a functional comparison of settings configured via trigger and across firmware editions. The comparison applies to ASTER possibilities and TITAN functionalities after the GBU firmware update. You need to purchase a USB-Link or Blu-Link to connect TITAN with GATE Control Station.

Edition comparison

Download Edition Comparison in PDF

In order to upgrade your ASTER, you need to purchase an upgrade:
Upgrade Page

Tech Specs

Tech Specs

  • Supply Voltage Range: 3.75-17 V
  • Current Consumption: 33 mA
  • Low Power Mode: 320 µA
  • Dimensions (Length x Width x Height): 67.5 x 32.4 x 13.5  mm
  • Finished Product Weight: 28.2 g
  • Operating Temperature Range: min. -15°C max. + 50°C
  • Relative Humidity: ≤ 80%

Please note:

TITAN V2 NGRS does not support DSG and 19-tooth gears

TITAN V2 NGRS supports:

  • Tokyo Marui M4 Next Generation
  • Tokyo Marui SCAR-H Next Generation
  • Tokyo Marui SCAR-L Next Generation
  • Tokyo Marui HK416D Next Generation
  • Tokyo Marui HK416C Next Generation
  • Tokyo Marui HK417 Next Generation

TITAN V2 NGRS does not support:

  • Tokyo Marui 36C Custom Next Generation
  • Tokyo Marui Model 36K Next Generation
  • Tokyo Marui AKS74N Next Generation
  • Tokyo Marui AKS74U Next Generation
  • Tokyo Marui AK102 Next Generation
  • Tokyo Marui AK47 Type 3 Next Generation

Warning!

GATE does not guarantee the compatibility of mosfets and ETUs such as TITAN or ASTER with brushless motors. Connection of a brushless motor can cause immediate damage to the device, motor and battery, that is not covered by the warranty and can lead to a fire.

Manual