HOT Bundle: EON TITANIUM Gearbox + TITAN II BT + PULSAR D + TACTICKER + NOVA TRIGGER
HOT Bundle: EON TITANIUM Gearbox + TITAN II BT + PULSAR D + TACTICKER + NOVA TRIGGER
Free express shipping
Free express shipping
Free express shipping via courier on all orders over 250 EUR
Shipping & Returns
Shipping & Returns
Destination | Express shipping via Fedex/UPS | Polish National Postal Service |
Europe | 2-7 business days | 1-2 weeks |
Asia | 2-5 business days | not available |
US/Canada | 2-3 business days | not available |
Australia | 3-4 business days | not available |
*Please note that the above delivery times may be extended due to custom duty procedure.
1. The Goods purchased in the Online Store are delivered worldwide, subject to territorial restrictions under applicable laws.
2. The Goods are delivered via specialised courier companies or Poczta Polska (the Polish national postal operator). In some cases, the Goods may be personally collected from the Seller’s registered office, and in the case of the Goods that represent digital content – they may be downloaded on an appropriate device.
3. The Goods are shipped within 1 to 3 (one to three) business days from payment booking. In some cases, the Goods can be shipped at a later date. This applies also to the Goods sold in advance (pre-sale). In such a case, the Seller shall inform the Client about a shipment date. An approximate shipment delivery date depends on a delivery method selected and a destination country, and is specified at order placement. When selecting a transfer payment option, the delivery time indicated on the Website shall be increased by time needed to credit the Client’s entire payment to the Seller’s bank account, usually 1-2 (one to two) business days. Further, in the case of countries outside the European Union, due to distance and potential customs controls the delivery time may be prolonged up to 5 weeks.
4. Detailed delivery method information is available in the Online Store in a Cart section of the given Product.
5. The Goods are shipped to an address specified in an order form or provided by phone or by e-mail. The Seller shall promptly inform the Client about the fact that an order form has been filled in incorrectly if this prevents or delays the conclusion of the Sales Agreement or the delivery of the Goods.
6. Prior to the acceptance of shipment from a postal or a courier service, packaging should be checked for any potential damage inflicted in transport. In particular, the condition of tapes or seals placed on the shipment shall be verified. If shipment package shows any signs of damage or if the seals (tapes) are removed, the shipment shall not be accepted, a damage report shall be prepared in the presence of a courier and the Seller shall be contacted as soon as possible in order to clarify the issue. If discrepancies in terms of shipment quantity or quality are not detected at the acceptance, this might adversely affect the resolution of the Client’s claims filed due to shipment damage or theft in transport.
7. In the case of the Goods that represent the firmware upgrade of devices distributed by the Seller (digital content), the Client, upon the placement of the Order, conclusion of the Sales Agreement and payment, shall connect to a GATE CONTROL STATION desktop application via a USB-Link or Blu-Link device and install the upgrade purchased.
Buy and test
Buy and test
Buy and test for up to 30 days – you can return the engine within a month from the delivery.
-
-
PULSAR D HPA Engine (dual solenoid, closed-bolt) with TITAN II Bluetooth® EXPERT– thanks to optical sensors combined with HPA technology, you get an absurd trigger response never before seen in airsoft. Get insane muzzle velocities ranging from 250-650 FPS & ROF from 1-40 RPS for CQB, assault, and sniper replicas. Closed-bolt and the innovative feed system guarantee you a straight and repeatable BB trajectory even in full AUTO – every time. Engine calibration has never been easier – PULSAR D & TITAN II Bluetooth® is introducing innovative cycle synchronization automation. The most advanced and user-friendly GCS app lets you access a multitude of settings and configurations like binary trigger, trigger sensitivity, ROF – live via Bluetooth®. You can even use a remote trigger on your smartwatch. Install the world's smallest and most advanced dual solenoid valve HPA engine in replicas where previously not possible due to size constraints. Choose one of the five nozzles included or use a regular AEG one. Take your HPA replica into the future!
-
-
Download GCS App
GCS App (GATE CONTROL STATION) gives you total control of your replica. It is a free universal app for configuring, controlling, and connecting the GATE Ecosystem elements such as the TITAN and ASTER Electronic Trigger Units or the tactical computer STATUS. The app is compatible with Android, iOS, Wear OS, watchOS, Windows, and macOS devices.
What makes PULSAR D unique?
-
-
Accuracy. Versatility. Compatibility.
PULSAR D is unrivaled thanks to the following combination:
- Simple design
- Innovative automatic synchronization of the nozzle movement cycle enables easier calibration – no need to fire thousands of rounds to achieve good FPS results and stable BB trajectories
- Due to its innovative BB feed system and closed-bolt mode, it is definitely less sensitive to replica and assembly quality
- Razor-sharp accuracy of the system – no unstable hop-up system symptom like in other HPA systems
- Seamless integration & compatibility with the most advanced optical ETU/FCU TITAN II Bluetooth® for a synergy effect
- High tolerances eliminating the mid-cap syndrome
- Compatibility with any AEG nozzles
- Zero nozzle wobble resulting in stable FPS when paired with GATE AEG nozzles, which translates into stable FPS and no mid-cap syndrome
- No FPS drops on AUTO relative to SEMI mode at high RPS – up to 40 RPS with no FPS drops
-
PULSAR D FEATURES
SIMPLE - Easy maintenance, thanks to a well thought-out design
VALUE FOR MONEY - State-of-the-art technology at the best price
COMPACT - Smallest dual solenoid valve closed-bolt HPA engine with innovative cycle synchronization
Bluetooth® ETU/FCU CONTROLLED - TITAN II Bluetooth® V2 gearbox drop-in ETU FCU mosfet AEG HPA – the first Bluetooth optical unit in an HPA replica
- Very high resolution trigger sensor – up to 50 points of sensitivity in the first millimeter
- Bluetooth® 5.2 – connectivity to other elements of the GATE ecosystem, e.g. STATUS, smartwatch
- For the first time in HPA replicas configurable fire modes such as BINARY TRIGGER, BURST, etc.
- Convenient GCS app for iOS, Android, macOS, Windows, watchOS, Wear OS
- Constant access to software updates
AEG COMPATIBILITY - Compatible with AEG nozzles – 5 nozzle lengths included for MP5, M4/M16:
- 20.30mm
- 21.00mm
- 21.15mm
- 21.25mm
- 21.40mm
NO MID-CAP SYNDROME - Eliminated mid-cap syndrome thanks to high dimensional tolerance
ACCURACY - High accuracy due to the innovative BB feed system for HPA engines
STABILITY - FPS stability in full AUTO mode
-
SPECIFICATIONS
-
PULSAR D – DUAL HPA SOLENOID ENGINE
The design and production of the device is based on harmonized standards.
Solenoid Voltage Range
5-8.4 V
Operating Pressure
60-140 PSI – high pressure only
Gas Consumption
For 90 PSI and a 48 ci/0.8 l 300 bar/4500 PSI bottle – 0.7 PSI per shot
Dimensions with innovative cycle synchronization automation (Length x Diameter x Height)
102 mm x 25.4 mm x 38.5 mm
Dimensions (Length x Diameter x Height)
100 mm x 25.4 mm x 32 mm
Finished Product Weight
90 g
Operating Temperature Range
min. -15° C, max. +50° C
Relative Humidity
≤ 80%
Regulated ROF
1 to 40 RPS (BB feed correctness depends on magazine)
Velocity
250 – 650 FPS
Operation Mode
Closed-Bolt / Open-Bolt
Pressure Range
60 do 140 PSI
-
Read more about TITAN II Bluetooth®
TITAN II Bluetooth®
Supply Voltage Range
5-8.6 VDC
Rated Current
10 A
Current Consumption
27 mA
Low Power Mode
100 µA
Connectivity
Bluetooth® 5.2 Low Energy
Dimensions (Length x Width x Thickness)
47.2 mm x 28.9 mm x 14.5 mm
Finished Product Weight
28.2 g
Operating Temperature Range
min. -15° C, max. +50° C
Relative Humidity
≤ 80%
ㅤ
ㅤ
-
Download GCS App
GCS APP
PULSAR D with TITAN II Bluetooth® and GCS App gives you total control of your replica.
GCS offers you the option to:
• Control your airsoft gun from a smartphone with Android, iOS and PC with Windows or macOS
• Get real-time data from your smartwatch (with Wear OS or watchOS) to reinforce your tactical decisions and get the advantage necessary to win
• No more surprises with an empty magazine or a discharged battery
• Easily adjust the ASTER settings during the game
• Update and upgrade firmware
• View the BB counters, electrical measurements, and statistics
• Perform diagnostics and send reports
• Get the latest news from GATE Enterprise
ㅤ
ㅤ
-
TITAN II Bluetooth® Features
2-STAGE TRIGGER
Enables you to set two different trigger sensitivities. Pulling the trigger slightly produces SEMI or BURST fire. Pulling it further produces BURST or AUTO fire. Select your sensitivity preferences for each stage.
SELECTOR MODES
Two selector sensors allow you to take advantage of hundreds of selector mode variations, depending on firmware edition. The following modes are available for selection*:
SAFE – prevents your replica from firing, even if the safety lever is removed
SEMI – allows you to fire one shot per one trigger pull
BINARY – allows for firing one shot on the trigger pull and another shot upon release
BURST – enables you to shoot a predetermined number of BBs, which is very useful in MilSims and when using low-caps; there are 2 BURST Modes available:
- Full – a burst is shot in full, even if the trigger is released before the preset number of BBs has been shot
- Interruptible – the burst can be interrupted by releasing the trigger earlier - when the trigger is released, the shooting stops even if not all the BBs from the burst have been shot
BURST/AUTO – available in Full BURST Mode only; allows for extending a burst by any number of shots – if you hold the trigger after the burst is shot, it switches to AUTO Mode
AUTO – shots are fired as long as the trigger is pulled
SEMI RAMPING – if you pull the trigger very fast, it switches to AUTO Mode
*You can check selector configuration possibilities provided by particular Firmware Editions here
Please note: In the case of Regional Lock, only SEMI Mode is available. Check law restrictions in your country.
MAGAZINE
This feature allows for simulating magazines of lower capacity than actually used. Depending on Firmware Edition, allows you to set a simulation of magazine capacity from 1 BB up to 250 BBs. Even if you have a high-capacity magazine, this function lets you truly increase the realism of your game by imitating that your magazine is real-cap. Then, after a predetermined number of BBs is shot, you will have to wait for a previously defined amount of time before the next shot can be fired as if you were really replacing an empty magazine with a full one. In the case of ADVANCED and EXPERT Firmware, you can also set Low Ammo Warning.
SERIES SAFETY LIMIT
Enables to set a predefined number of BBs fired in a single series. It can be used as protection against trigger jams. In case of emergency, you can stop the series by switching the selector position.
SNIPER DELAY
It lets you set the delay between shots or series to simulate the delay from reload or recoil. You can setthe delay to 0.2 s, 0.5 s, 1 s, 2 s or 3 s for ADVANCED firmware and 0.01-5 s for EXPERT firmware.
ROF CONTROL
ROF Control enables the reduction of a replica’s rate of fire. You can use stronger batteries and still have the ROF exactly as you like. Depending on firmware edition, you can choose between Adaptive, Manual PWM, Manual Delay, and Manual Delay + PWM.
Adaptive – set your desired rate of fire; the brake and delay will be automatically adjusted to achieve this value
Manual PWM – set the motor power throughout the duration of the shot
Manual Delay – set the exact delay between shots in milliseconds
Manual Delay + PWM – set braking power and delay manually
SMART TRIGGER
We know how vital fast trigger response during combat is. That's why we've developed the Smart Trigger function, which enables you to achieve faster trigger response. It works with the ROF Control System. During the first shot, the microprocessor sets the ROF control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full ROF and subsequent shots at a reduced ROF. The best results can be achieved when using a battery with above standard voltage. For example, if you’re using a 7.4 V battery, you can replace it with a 11.1 V one. This way, you will achieve faster trigger response with the same rate of fire than with a standard battery.
*Works only if ROF is decreased using the power settings of ROF control.
BATTERY PROTECTION & WARNINGS
Protection against battery over-discharge. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor is constantly monitoring battery voltage. When voltage drops to a critical level, it will not allow firing. The number of battery cells can be detected automatically.
LOW BATTERY WARNING
When battery voltage drops to a predefined level, the motor will vibrate at regular intervals. The user is warned 5 times before the battery is discharged. Each warning is communicated by 3 vibrations: HIGH → MID → HIGH.
EQUALIZER
You don't need to fully release the trigger to fire the next shot. This option is really useful when the trigger sensitivity level is very high. Choose between two types of equalizer.
- OFF - to fire the next shot, you need to release the trigger until it reaches the selected trigger sensitivity level.
- 2LVL - to fire the next shot, just release the trigger until it moves over two adjoining sensors.
- 1LVL - to fire the next shot, just release the trigger until it moves over an adjoining sensor.
DIAGNOSTICS
This feature allows you to troubleshoot your AEG in case of any issue. Errors are communicated once they occur, and their description can be found in the GCS App.
BUILT-IN SELF-TEST
This allows you to quickly check whether the drop-in module is working properly. It helps to locate where the problem lies when anything goes wrong.
COATING
Thanks to its special conformal coating, our product is resistant to atmospheric conditions (Military Specification MIL-V-173C).
Which engine is best for you – PULSAR S or PULSAR D?
You will find the PULSAR S engine a more economical choice if you can axially align the gearbox correctly. If you are looking for an economical solution for weekend games on small fields and speedsoft competitions – PULSAR S is for you.
If you are looking for the best HPA engine on the market, guaranteeing the best accuracy and performance – PULSAR D is especially for you.
-
PULSAR S
System
Open-Bolt
Number of solenoid valves
1
Installation
Requires very good axial alignment of the engine in relation to the chamber
Nozzles
Dedicated
Sizes
Smallest single solenoid valve HPA engine on the market - for installation in custom replica modifications
ROF
70 RPS – possible higher RPS value with an efficient magazine
Muzzle Velocity
200-500
Operating Pressure
60-140 PSI
Gas Consumption Efficiency
~1 PSI per shot at 90 PSI and 0.8 l cylinder
Application
Fast CQB configurations, the most affordable single-valve HPA engine on the market – ECONOMIC version
-
PULSAR D
System
Closed-Bolt or Open-Bolt
Number of solenoid valves
2
Installation
Due to its innovative BB feed system and closed-bolt mode, it is definitely less sensitive to replica and assembly quality
Nozzles
Universal AEG
Sizes
Smallest dual solenoid valve HPA engine on the market - for installation in custom replica modifications
ROF
40 RPS – possible higher RPS value with an efficient magazine
Muzzle Velocity
250-650
Operating Pressure
60-140 PSI
Gas Consumption Efficiency
~0.7 PSI per shot at 90 PSI and 0.8 l cylinder
Application
High precision, accuracy, greatest application versatility –the most affordable two-valve HPA engine on the market – PRO version
Compatible Accessories
-
PULSAR Accessories
- Power supply cable (GEL BLASTER/Electric Magazine/Tracer)
- Single solenoid HPA cable
- Dual solenoid HPA cables
- Divider ready for connecting many accessories (you can connect 1x power supply cable and 2x I/O cable)
- Universal I/O cable for max. 2 DIY accessories (bolt catch & magazine sensors)
- Bolt Catch with button and cable (ready to connect)
- Magazine sensor with cable (ready to connect)
ㅤ
-
Need help?
Discover GATE Ecosystem
-
TITAN
Transform your AEG into a computerized training system and gain a unique tactical advantage thanks to extremely fast trigger response—just like in real life.
-
ASTER
The younger brother of the well-known TITAN. Designed to achieve maximum reliability at an attractive price and destined for most AEGs. ASTER is destined for most builds.
-
STATUS
Get data in real-time directly from the STATUS screen to reinforce your tactical decisions. No more surprises with an empty magazine or a discharged battery.
-
GCS APP
GATE Control Station is a free universal app for configuring, controlling, and connecting the GATE Ecosystem elements such as the TITAN, ASTER and STATUS.
-
VIRTUAL STATUS SMARTPHONE
Virtual STATUS functions in your smartphone. No more surprises with an empty magazine or battery.
-
VIRTUAL STATUS SMARTWATCH
GCS App provides essential STATUS functionalities such as the BB counter, magazine counter, and the remaining shots on the battery.
-
BLU-LINK
Blu-Link allows for wireless management of your GATE ETU via the GCS App. You can use an iPhone, Android smartphone or a PC to control your replica with Bluetooth® 5.0.
-
USB-LINK
The USB-Link dongle is used for connecting GATE ETUs with PC, Mac, and Android devices. Working in tandem with the GCS App gives you full access to functions and settings.
PULSAR D Accessories
-
HPA Engine QD fitting
Regular price EUR 19,16Regular priceUnit price / per -
Sold out
EON Hop-Up Chamber
Regular price EUR 52,48Regular priceUnit price / perSold out -
EON V2 Gearbox rev. 2 [CNC]
Regular price From EUR 137,92Regular priceUnit price / per -
Magazine and Bolt-Catch sensor with a single connector for TITAN II Bluetooth®
Regular price EUR 18,25Regular priceUnit price / per